Loading...
※翻訳は機械翻訳サービスを利用しております
Fire safety journal2019Jul01Vol.107issue()

中規模のメタノール、エタノール、アセトンのプール火災のエネルギーバランス

,
,
,
文献タイプ:
  • Journal Article
概要
Abstract

よく換気された静止したオープン環境で着実に燃えている中規模のプール火災を特徴付けるために、いくつかの一連の測定が行われました。放射および総熱流束の時間平均局所測定は、着実に燃焼メチルアルコール(メタノール; CH3OH)、エチルアルコール(エタノール; C2H5OH)、およびアセトン((CH3)2 CO)プール火災で行われました。水冷ステンレス鋼バーナーの燃料唇の高さは、10 mmに維持されました。Schmidt-Boelter熱流束ゲージを使用して、周囲への放射放出を測定しました。プール表面に向けられた総熱流束は、プール表面のすぐ上にあるガードンゲージを使用して測定されました。以前に開発された方法を使用して、プール表面への対流熱流束を計算し、放射フラックスの推定を可能にしました。これは、メタノールプールの火災での以前の測定と実験的な不確実性の範囲内で一致しました。定常状態の質量燃焼速度は荷重セルを使用して測定され、熱放出速度は熱量測定を使用して排気中に測定されました。各火災のエネルギーバランスが決定されました。結果は、これらのプール火災で放射と対流の両方が重要な役割を果たすことを示しました。放射線は、燃料表面への熱フィードバックの支配的なメカニズムであり、エネルギーの68%から88%までの会計であり、プルームで対応するエンタルピーは火の総エネルギーの68%から78%を表し、周囲への放射放出をはるかに超えています。

よく換気された静止したオープン環境で着実に燃えている中規模のプール火災を特徴付けるために、いくつかの一連の測定が行われました。放射および総熱流束の時間平均局所測定は、着実に燃焼メチルアルコール(メタノール; CH3OH)、エチルアルコール(エタノール; C2H5OH)、およびアセトン((CH3)2 CO)プール火災で行われました。水冷ステンレス鋼バーナーの燃料唇の高さは、10 mmに維持されました。Schmidt-Boelter熱流束ゲージを使用して、周囲への放射放出を測定しました。プール表面に向けられた総熱流束は、プール表面のすぐ上にあるガードンゲージを使用して測定されました。以前に開発された方法を使用して、プール表面への対流熱流束を計算し、放射フラックスの推定を可能にしました。これは、メタノールプールの火災での以前の測定と実験的な不確実性の範囲内で一致しました。定常状態の質量燃焼速度は荷重セルを使用して測定され、熱放出速度は熱量測定を使用して排気中に測定されました。各火災のエネルギーバランスが決定されました。結果は、これらのプール火災で放射と対流の両方が重要な役割を果たすことを示しました。放射線は、燃料表面への熱フィードバックの支配的なメカニズムであり、エネルギーの68%から88%までの会計であり、プルームで対応するエンタルピーは火の総エネルギーの68%から78%を表し、周囲への放射放出をはるかに超えています。

Several series of measurements were made to characterize medium-scale pool fires steadily burning in a well-ventilated, quiescent, open environment. Time-averaged local measurements of radiative and total heat flux were made in steadily burning methyl alcohol (methanol; CH3OH), ethyl alcohol (ethanol; C2H5OH), and acetone ((CH3)2 CO) pool fires. The fuel lip height in a water-cooled stainless-steel burner was maintained at 10 mm. Schmidt-Boelter heat flux gauges were used to measure the radiative emission to the surroundings. The total heat flux directed towards the pool surface was measured using a Gardon gauge positioned just above the pool surface. A previously developed method was used to calculate the convective heat flux to the pool surface, allowing estimation of the radiative flux, which agreed within experimental uncertainty with a previous measurement in the methanol pool fire. The steady-state mass burning rate was measured using a load cell, and the heat release rate was measured in the exhaust using calorimetry. The energy balance for each of the fires was determined. The results showed that both radiation and convection play significant roles in these pool fires. Radiation was the dominant mechanism of heat feedback to the fuel surface, accounting from 68 % to 88 % of the energy, while enthalpy convected in the plume represented 68 % to 78 % of the fire's total energy, far exceeding radiative emission to the surroundings.

医師のための臨床サポートサービス

ヒポクラ x マイナビのご紹介

無料会員登録していただくと、さらに便利で効率的な検索が可能になります。

Translated by Google